Superplasticizers with set-acceleration for mortars and grouts
BATIMIX MSP-A Series are liquid high-range water-reducing (superplasticizer) admixtures for mortars and grouts based on chemicals designed to accelerate setting. They do not contain calcium chloride or other potentially corrosive ingredients.
BATIMIX MSP-A Series products reduce the free-water content and improve the workability of mortar and grout mixes. They powerfully disperse, by electrostatic repulsion and adsorption, the fine cementitious particles in the mix, thus increasing the mix workability and allowing specified strength grades to be achieved with reduced cement content.
BATIMIX MSP-A Series products are particularly recommended for use in cold climates. They decrease setting times and thus allow the acceleration of finishing operations and removal of formworks.
Mortars prepared with BATIMIX MSP-A Series products are characterized by the following:
In the plastic state:
In the hardened state:
This series includes the following products:
A variety of products from within this series are available to meet the specific requirements of customers. Products highlighted in bold are featured in the product brochure for this category.
Brown
BATIMIX MSP-A Series products are not considered hazardous products. However, they should not be swallowed or allowed to come into contact with skin and eyes. Suitable gloves and goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.