Epoxy floor and wall coating
BATIMIX Epoxy Coating 160 is a solvent-free, pigmented, two-component, liquid epoxy resin based on formulated amine hardeners.
BATIMIX Epoxy Coating 160 is a coating material designed for concrete, masonry, and metal, such as iron and steel surfaces. It can be mixed with additives, as it has low viscosity, to produce flow mortars and filler compounds. It is primarily applied on floors and wall surfaces, which must withstand considerable chemical and mechanical loads. It is typically used in the chemical and textile industries. It is suitable to coat containers, silo constructions, sewage structures, battery plants, etc.
BATIMIX Epoxy Coating 160, after hardening, exhibits high mechanical strength, excellent resistance to abrasion, and good elasticity. It is weather-proof, waterproof, waste, and seawater proof. It has excellent resistance against organic and inorganic acids, mineral oils, and many solvents.
BATIMIX Epoxy Coating 160 is resistant to constant temperatures and temperature variations from -30°C to + 100°C of dry heat and up to + 60°C of wet heat. The mortars based on BATIMIX Epoxy Coating 160 are resistant to dry heat temperatures of up to 120°C and wet heat temperatures of up to 80°C. For short periods, the mortars can withstand temperatures higher by 20°C to 30°C than those indicated hereinabove.
Floor coatings can be cleaned by steam jets.
Brown
BATIMIX Epoxy Coating 160 is not a hazardous material. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable gloves and goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.
ReferenceMS-PR-5943