Polysulphide sealant (two parts) gun grade
Batimix Polysulphide Sealant 110 NS is a gun grade non-sag two-part, highly elastic, polysulphide caulking and sealing compound. It cures at normal temperatures creating a tough elastomeric seal that adheres tenaciously to masonry, metal, and wood. It remains resilient to expansion and contraction due to daily and seasonal cyclic changes in temperature. It has excellent chemical, solvent, and water resistance and withstands joint movement of up to +/-25%.
Batimix Polysulphide Sealant 110 NS is a gun grade highly elastic sealant used for vertical and horizontal joints, subject to expansion resulting from temperatures changes. It is resistant to benzene, fuel oil, etc., and thus withstands vehicle traffic, mechanical impact, UV exposure, and abrasion. It is resistant to rot.
Primary areas of application include normal panel and curtain wall construction joints, gas stations, industrial floors, bridges, car parks, garages, sidewalks, and pedestrian and vehicular traffic areas. It can withstand joints contact with water. It thus may be used in water reservoirs, dams, and foundation joints.
Batimix Polysulphide Sealant 110 NS is used as a sealant for glazing and caulking similar and dissimilar materials. Service temperatures range from -45⁰C to over 80⁰C. It is used to seal dynamic joints in contact with chemicals. It can withstand splash & spill contact with jet fuel.
BATIMIX Polysulphide Sealant 100 NS should not be swallowed or come into contact with eyes. Suitable goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.