Batimix Mortar W-862

Non-shrink waterproof mortar for filling large voids


BATIMIX Mortar W-862 is a cementitious non-shrink waterproof grout for filling large voids and joints greater than 20mm.

It is made from Portland cement, carefully-graded natural and crushed sand, and a combination of selected additives to enhance workability, adhesion, and waterproofing. It is durable, resistant to frost and heat after setting.

Main Purpose

BATIMIX Mortar W-862 is used to fill large holes and voids greater than 20mm. It is suitable for both interior and exterior applications. This product allows for obtaining consistent properties of the fresh and hardened mortar.

It is primarily used to grout structures such as supports beneath load-bearing units, column-based plates, anchors, dowels, and beams.


BATIMIX Mortar W-862 has the following characteristics:

  • Spreads and clings easily on cementitious-based substrates
  • Has a high degree of adhesion/bond on the substrate
  • Non-staining, it offers a similar appearance to parent concrete and mortar surfaces
  • High strength and flexural characteristics
  • Positive expansion that eliminates all types of shrinkage problems and surface cracks
  • Reduced level of water penetration
  • Extremely-low water absorption, yet increased water vapor transmission
  • Improved durability with a high quality finished texture






  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar W-862 contains cement that is irritating to the eyes and skin. In case of contact, rinse immediately with plenty of water. Wear suitable gloves. For further information, kindly refer to the product's Material Safety Data Sheet.