Batimix Mortar W-860

Non-shrink waterproof grout for filling joints smaller than 4 mm


BATIMIX Mortar W-860 is a cementitious non-shrink and waterproof grout used for filling joints smaller than 4mm.

It is made from Portland cement, carefully-graded sand, and a combination of selected additives to enhance workability, adhesion, and waterproofing. It is durable, resistant to frost and heat after setting.

Main Purpose

BATIMIX Mortar W-860 is used to fill narrow holes and small joints less than 4 mm. It is suitable for interior and exterior elements. This product allows for obtaining consistent properties of the fresh and hardened mortar.

Main applications include the grouting of structures, such as supports beneath load-bearing units, column-based plates, anchors, dowels, and beams.


BATIMIX Mortar 860 has the following characteristics:

  • Spreads and clings easily on cementitious-based substrates
  • Strong adhesion on the substrate
  • Non-staining, it offers a similar appearance to parent concrete and mortar surfaces
  • High strength and flexural characteristics
  • Positive expansion, thus eliminating all types of shrinkage problems and surface cracks
  • Reduced level of water penetration
  • Extremely-low water absorption, yet with increased water vapor transmission
  • Improved durability, with a high-quality finished texture




  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar W-860 contains cement that is irritating to the eyes and skin. In case of contact, rinse immediately with plenty of water. Wear suitable gloves. For further information, kindly refer to the product's Material Safety Data Sheet.