Batimix Mortar W-860 Z

Non-shrink, waterproof mortar (grout) for filling joints smaller than 4mm

Description

BATIMIX Mortar W-860 Z is a cementitious-based non-shrink and waterproof grout for filling joints smaller than 4mm.

It is made from Portland cement, carefully-graded sand, and a combination of selected additives to enhance workability, adhesion, and waterproofing. After setting, it is durable and resistant to frost and heat.

Main Purpose

BATIMIX Mortar W-860 Z is used where filling of narrow holes and small joints less than 4 mm are critical. It is used for interior and exterior elements. This product allows for obtaining consistent properties of the fresh and hardened mortar.

Main applications include grouting structures, such as supports beneath load-bearing units, column-based plates, anchors, dowels, and beams.

Features

BATIMIX Mortar 860 Z has the following characteristics:

  • Spread and cling easily on cementitious-based substrates
  • High-degree of adhesion/bond on the substrate
  • Non-staining, offering a similar appearance to parent concrete and mortar surfaces
  • High strength and flexural characteristics
  • Positive expansion, thus eliminating all types of shrinkage problems and surface cracks
  • Reduced level of water penetration
  • Extremely-low water absorption, yet increased water vapor transmission
  • Improved durability, with a high-quality finished texture\
  • Improved sulfate resistance

Color

Gray

Packaging

  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar W-860 Z contains cement that is irritating to the eyes and skin. In case of contact, rinse immediately with plenty of water. Wear suitable gloves. For further information, kindly refer to the product's Material Safety Data Sheet.