Batimix Mortar 760

Two-component, cementitious-based waterproof and elastic slurry


Two-component BATIMIX Mortar 760 is a ready-to-use high-performance slurry, which waterproofs and protects concrete and masonry surfaces from moisture, humidity, and various aggressive agents. The powder component (A) consists of a blend of Type I Portland cement, fillers, carefully graded sand, and selected active chemical compounds. The liquid component (B) is based on elastomers and synthetic resins for improving waterproofing and elasticity.

Main Purpose

BATIMIX Mortar 760 is particularly suitable for waterproofing concrete surfaces subjected to a high degree of moisture, rain, or water. The product has elasticity and elongation properties. It is suitable for use in zones that have cracks and small deforming problems. It is applied to structurally sound cementitious-based surfaces, whether old or new. Typical areas of application include residential facades, swimming-pools, containers, sewerage plants, and basements.


Applied to sound masonry structures, BATIMIX Mortar 760 blocks capillaries and minor shrinkage-cracks, preventing further water ingress under active or passive water pressure. The product offers the following advantages:

  • High adhesion to substrates and workability
  • Relative rate of water absorption (ASTM C 1403), which is around 20 times less than the reference mixture made without active waterproofing chemicals
  • Modulus of elasticity (ASTM D 638), which is around 8 times less than the reference mixture made without synthetic resins. It can therefore bridge, at 23 ºC, an elongation of cracks of up to 30%




Gray powder + white liquid


  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar 760 contains cement and irritating chemicals that may harm the eyes and skin. In case of contact, rinse immediately with plenty of water. Wear suitable gloves. For further information, kindly refer to Material Safety Data Sheet.