Batimix Mortar 680

Shotcrete mortar for wet process applications - General use


BATIMIX Mortar 680 is a pre-blended shotcrete mixture designed for general use in wet process applications. It contains Type I Portland cement, selected additives, and carefully-graded fine and coarse aggregates. It exhibits enhanced shotcrete characteristics and physical properties.

BATIMIX Mortar 680 is thoroughly mixed with water and introduced into the shotcrete equipment. The wet material, which exhibits improved cohesion characteristics, is pumped through the hose and compressed air added at the nozzle. It impacts the surface at high velocity resulting in a well-compacted product that is easy to place and consolidate.

Main Purpose

BATIMIX Mortar 680 mixes are used to strengthen and repair existing structures. They are also used to build complex architectural shapes, such as skateboard parks, swimming pools, and earth-retaining structures. The surfaces can have a horizontal, vertical, or overhead orientation. They are suitable for the lining and rehabilitation of cementitious-based substrates, such as sewers, tunnels, reservoirs, and water mains.


BATIMIX Mortar 680 has the following characteristics:

  • Easy to use, suitable for both interior and exterior shotcrete works
  • High early and final compressive strength without added chlorides
  • Eliminate cracking and surface fissures
  • Reduced bleeding and sagging
  • High degree of adhesion and bonding to the protected substrate


Grey powder


  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar 680 contains cement that is irritating to the eyes and skin. In case of contact, rinse immediately with plenty of water. Wear suitable gloves. For further information, kindly refer to Material Safety Data Sheet.