Batimix Mortar 664

Fiber shotcrete mortar for dry process applications - Minimized level of post-cracking


BATIMIX Mortar 664 is a pre-packaged dry shotcrete mixture that minimizes post-level cracking. It contains Portland cement type I, fibers, selected additives, and carefully-graded fine and coarse aggregates.

The dry material is introduced in the shotcrete machine, pumped through the hose and compressed air added at the nozzle. It impacts the surface at high velocity resulting in a well-compacted product that is easy to place and consolidate.

Main Purpose

BATIMIX Mortar 664 is a structural fiber-reinforced material. It is used to repair and rehabilitate horizontal, vertical, and overhead surfaces of structures, such as bridges, garages, beams, and slabs. TIt is also used for ground support in mining or tunneling applications, the lining of sewers and shafts, slope stabilization, and soil nailing. Substrates on which it may be applied include rock, soil, brick, or any cementitious-based surface.


BATIMIX Mortar 664 has the following characteristics:

  • Easy to use, suitable for both interior and exterior shotcrete works
  • High early and final compressive strength without added chlorides
  • Reduced bleeding and sagging
  • High degree of adhesion and bonding to the projected substrate
  • Minimized flexural post-cracking due to the presence of fibers


Grey powder


  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar 664 contains cement that is irritating to the eyes and skin. In case of contact, rinse immediately with plenty of water. Wear suitable gloves. For further information, kindly refer to Material Safety Data Sheet.