Batimix Mortar 662

Shotcrete mortar for dry process applications - Lower permeability


BATIMIX Mortar 662 is a pre-blended dry shotcrete mixture designed to achieve low permeability. It contains Type I Portland cement, silica fume, selected additives, and carefully-graded fine and coarse aggregates.

The dry material is introduced in the shotcrete machine, pumped through the hose and compressed air added at the nozzle. It impacts the surface at high velocity resulting in a well-compacted product that is easy to place and consolidate.

Main Purpose

BATIMIX Mortar 662 mixture is a structural material. It is designed for the repair and rehabilitation of horizontal, vertical, and overhead surfaces. It is used to repair bridges, garages, beams, slabs, and others. It is also used for ground support in mining or tunneling applications, the lining of sewers and shafts, slope stabilization, and soil nailing. Substrates on which it may be applied include rock, soil, brick, or cementitious-based material.


BATIMIX Mortar 662 has the following characteristics:

  • Easy to use, suitable for both interior and exterior shotcrete works
  • High early and final compressive strength without added chlorides
  • Reduced bleeding and sagging
  • High degree of adhesion and bonding to the projected substrate
  • Improved resistance to water and chloride permeability


Grey powder


  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar 662 is a mixture of cement and silica fume that is irritating to the eyes and skin. In case of contact, rinse immediately with plenty of water. Wear suitable gloves. For further information, kindly refer to Material Safety Data Sheet.