Batimix Mortar 602

Non-shrink mortar for filling joints larger than 10 mm


BATIMIX Mortar 602 is a ready-to-use cementitious-based non-shrink grout used for filling joints larger than 10 mm. It is made from cement, graded sand, and selected additives, which improve positive expansion, workability, water repellency, and adhesion to substrates.

Main Purpose

BATIMIX Mortar 602 is primarily used to fill holes and joints larger than 10 mm in diameter. It is used for interior and exterior applications. The properties of applied mortars, whether in the fresh or hardened state, are consistently the same.

Main applications include the grouting of a variety of load-bearing units, column-based plates, anchors, dowels, and beams.


Batimix Mortar 602 is characterized by the following:

  • Spreads and clings easily to cementitious-based substrates
  • Strong adhesion to substrates
  • Non-staining, it offers a similar appearance to parent concrete and mortar surfaces
  • High strength and flexural characteristics
  • Positive expansion eliminates all types of shrinkage problems and surface cracks
  • Reduced level of water-penetration from the presence of a water-repellent agent
  • Enhanced durability of the finished product


Gray powder


  • 25KG Paper Bag

Health & Safety

BATIMIX Mortar 602 contains cement that is irritating to the eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. For further information, kindly refer to Material Safety Data Sheet.