Batimix Epoxy 200 Gel

Epoxy adhesive - High modulus - Non sag


BATIMIX Epoxy 200 Gel is a 100% reactive, two-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in a low viscosity (LV), medium viscosity (MV), or high viscosity (Gel) consistency. BATIMIX Epoxy 200 Gel provides a faster cure time for bonding concrete at temperatures ranging from 1°C to 16°C.

Main Purpose

BATIMIX Epoxy 200 Gel is a multi-purpose product. It is suitable for the following applications:

  • General adhesive
  • Bonding agent for anchoring bolts, dowels, and pins
  • Non-sag material for vertical and overhead coatings.


BATIMIX Epoxy 200 Gel exhibits the following characteristics:

  • High-early strength at low temperatures
  • Excellent-adhesive for bonding together concrete, steel, ceramic, or wood.
  • Easy to use mix ratios by volume
  • Working time and cure time decrease as temperatures increase and conversely increase as temperatures decrease
  • Strong adhesive for anchoring, bolts, dowels, and pins

BATIMIX Epoxy 200 Gel is mixed with sand or other aggregates to produce epoxy repair mortars and epoxy repair concrete. Mix the epoxy unit (part A) with the hardener unit (part B) before adding the aggregate, troweling the mortar into place.

If the surface is too rough, a topcoat of either BATIMIX Epoxy 200 LV or BATIMIX Epoxy 200 MV can be applied.


The mix ratio of component A:B is 2:1 by volume


  • Two components (3.8 liters + 11.4 liters)

Health & Safety

BATIMIX Epoxy 200 Gel is not a hazardous material. However, do not heat it with open flames. It should not be swallowed or allowed to come into contact with skin and eyes. Suitable gloves and goggles should be worn as epoxy components may cause skin irritation. For additional information, kindly refer to the product’s Material Safety Data Sheet.