Batimix Stain Sealer 610

Description

BATIMIX Stain Sealer 610 is a unique pigmented solvent-based stain sealer designed specifically for concrete and other decorative surfaces. This product is non-yellowing and resistant to salt-spray, acids, alkali, water, ultraviolet rays, and wet and dry abrasion. It provides a cool surface on pool decks, restores old-looking concrete to a new luster, and eliminates staining while providing an easy to clean surface.

Main Purpose

Surfaces treated with BATIMIX Stain Sealer 610 are characterized by the following: (1) Proper curing of new concrete, (2) Pure acrylic polymer ensures no yellowing and a more breathable seal, (3) Enhance the appearance of colored concrete, and (4) Harder and more durable than standard cure.

Features

Surfaces treated with BATIMIX Stain Sealer 610 are characterized by the following:

• Proper curing of new concrete
• Pure acrylic polymer ensures no yellowing and a more breathable seal
• Enhance the appearance of coloured concrete
• Harder and more durable than standard cure

Properties

• Appearance : liquid (can be pigmented to achieve various colours)
• Adhesion to concrete : excellent
• Time before foot traffic : 6 hours
• Time before Re-coat : 2 to 12 hours
• Time before wheel traffic: 24 hours
• Solvent resistance : excellent
• Coverage (1st coat) : around 5 m²/ l
• Coverage (2nd coat) : around 7.5 m²/l
• Compliance with Standards: ASTM C309 Type 1

Health and Safety

BATIMIX Stain Sealer 610 is not a hazardous material. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable gloves and goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.

Directions for Use

Surface preparation: All old paint, oil, and grease must be removed. It is required that most concrete must be etched as a porous surface. Etching should be done with 10 parts water to 1 part Muriatic Acid Solution. Extremely hard or polished concrete may require a second application with a stronger solution. Rinse surface thoroughly with plenty of clean water and let dry completely.

Application: Apply at a uniform coverage with an industrial hand held pump-up or airless sprayer, or by paint roller. Common garden-type sprayers should not be used. The first coat of BATIMIX Stain Sealer 610 acts as a primer for the second coat. Allow the first coat to dry tack-free before applying the second coat. Best performance and appearance is achieved with two coats, following the prescribed coverage rates.

Application of BATIMIX Stain Sealer 610 too heavily, in too many successive coats, or in multiple coats over time can cause bubbling, whitening, peeling, and ultimate failure of the product. To prevent over-application, it is good practice to measure the area to be sealed and the corresponding volume of product required based on the coverage rate. Also, applying BATIMIX Stain Sealer 610 in hot weather or onto a hot surface can cause bubbling.

Compatibility

BATIMIX Stain Sealer 610 is compatible with all types of cementitious-based concrete substrates made using Portland cement or replacement materials such as silica fume, fly ash, or blast furnace slag. Its final performance should be assessed using trial tests.

Technical Support

Holderchem provides, upon request, technical advisory services pertaining to mix design, admixture selection, and materials evaluation.

Storage

BATIMIX has a minimum shelf life of 12 months if kept unopened and stored at temperatures ranging from 2 to 50ºC.

Packages

• 1 t IBC
• 200 kg plastic drum
• 20 kg plastic pail
• 4 kg plastic pail