Batimix Sealing Tape 530

Description

BATIMIX Sealing tape 530 a self-adhesive sealing tape consisting of a high- performance butyl rubber adhesive compound, protected by an aluminum colored 35-μm low-density polyethylene film. It is highly adhesive, even at low temperatures, to all common materials. The product must be protected from UV rays. It is available in various sizes for multipurpose applications.

Main Purpose

BATIMIX Sealing tape 530 is used to seal and join glass, steel, Plexiglas, polycarbonate, wood, aluminum, and polyvinyl chloride (PVC). It is also used to seal and insulate windows, pipes, air-ducting construction, and HVAC industry elements. It is easily stretchable and deformable and thus suitable for applications on irregular surfaces. It is also an anti-corrosive tape for underground pipes.

Features

BATIMIX Sealing Tape 530 exhibits the following characteristics:

• Flexible and easily stretchable
• Cold applied
• Excellent adhesion at low temperatures
• Waterproof and self-sealing
• Excellent heat stability
• No oil migration
• Solvent-free

Properties

• Film Type : Low Density Polyethylene film 35 μm
• Colour: Aluminium coloured
• Compound Type: Butyl Rubber Adhesive
• Colour: Grey
• Tensile Strength (EN 12311-1): Length 40 N/50 mm | Transversal 40 N/50 mm
• Solid Content: 100 %
• Probe Track (ASTM D 2979): 8.0 N
• Vapour Diffusion (NFT 30018): 2 gr/m²/24 h
• Service Temperature Range: - 30 °C / + 90 °C
• Standard Thicknesses: 0.8 / 1.0 mm
• Elongation at Break (EN 12311-1): Length 600 % and Transversal 600 %
• 180° Peel Adhesion (ASTM D 1000): 20 N/cm
• Vertical Flow (ISO 7390): 0 mm
• Application Temperature Range: 0 °C / + 40 °C
• Total Volatile Organic Compound emissions (TVOC) (ISO 16000-6): : 30μg/m³

Health and Safety

BATIMIX Sealing tape 530 is not a hazardous material. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable gloves and goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.

Directions for Use

The sealing tape must be applied to a clean, dry, smooth and dust-free surface. 
For applications between 0°C and 5°C, ensure that frost and condensation are absent from the surface.

In case of porous supports, it is advisable to stabilize the surface. 
No special tools are required to install this sealing tape. To apply, choose the most suitable width of the sealing tape; unroll the tape until the desired length is reached; start removing the release liner that covers the adhesive part of the tape and position the sealing tape,
carry out a roll-pressing to avoid entrapment of air bubbles.
When connecting two tapes, use an overlap of at least 5 cm. Press with a roller or a cloth pad.
Protect the tape from UV-rays within a few months of installation.

Technical Support

For proper products usage, Holderchem provides complete technical laboratory support and on-site assistance pertaining to the application methods.

Storage

Dimensions: Standard length : 15 m Standard thicknesses : 0.8 / 1.0 mm Standard widths : 5/7. 5/10/15/20/22.5/30/45/100 cm

Other widths, lengths and thicknesses are available on request.
Less than one meter wide rolls are individually packed in shrink-wrap, placed in boxes and packed on pallets.

The quality and the characteristics of the materials remain unaltered for a long period of time.
However, it is recommended to use the product within 12 months from production date.

The product must be stored in the original and unopened packaging in a dry and well ventilated place at temperatures between + 5°C and + 40°C.
Storage above 50 °C may lead to difficulties in removing the release liner when applying.

The product is not affected by frost.