Batimix Release L-660

Holderchem

Liquid release agent for stamped concrete

Description

BATIMIX Release L-660 is a liquid release agent used in Stamped Overlay applications, and anywhere powdered release agents are impractical to use. This release agent conditions the stamping tool to prevent the concrete from sticking to it and allows for the best possible imprint without pulling up the surface.

Main Purpose

BATIMIX Release L-660 is used as a stamp tool release and secondary color accent on plain concrete or colored concrete.

Features

BATIMIX Release L-660 is characterized by the following:

  • No dust
  • No color
  • Low odor
  • Clean tool release
  • Won’t damage stamps
  • No residue

Properties

  • Appearance : liquid
  • Density: around 1.02 g/cm³
  • Coverage: around 1 L / 10 m²

Health and Safety

BATIMIX Release L-660 is not a hazardous material. It should not be swallowed or allowed to come into contact with skin and eyes. Suitable goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.

Directions for Use

Preparation:

All surrounding areas should be protected from contamination. Poly sheeting is recommended for masking.

Broadcasting procedure:

BATIMIX Release L-660 should be sprayed lightly on the under-side of the stamping tool. Before stamping, the concrete should be allowed to cure to a spongy but firm surface that is not hard. Once the concrete is stamped, remove the stamping tool immediately but carefully and allow the concrete surface to dry. Reapply Liquid Release as needed throughout stamping process.

Finishing:

Because liquid release leaves no color, it may be required the use of a secondary color to the stamped surface. Consult technical data sheets for application procedures and safety precautions.

Compatibility

BATIMIX Release L-660 is compatible with all types of cementitious-based concrete made using Portland cement or replacement materials such as silica fume, fly ash, or blast furnace slag.

Technical Support

Holderchem provides, upon request, technical advisory services pertaining to mix design, admixture selection, and materials evaluation.

Storage

BATIMIX Release L-650 has a minimum shelf life of 12 months if kept unopened and stored at temperatures ranging from 2 to 50 ºC.

Packages

  • 1 t IBC
  • 200 kg metallic drum
  • 20 kg plastic pail
TS 6042Issue Date: 16-12-2020

The information and advice provided are based on current knowledge, Holderchem makes no warranty as to completeness or accuracy. {company} does not guarantee the merchantability or fitness of its products for particular purposes, and is not liable for any consequential or incidental damage or loss arising from the use of its products. HC®, HOLDERCHEM® and BATIMIX® are trademarks of {companyLegal}. Buyers should refer to recent product datasheets, trademark usage policies, and general conditions of sale on {website}. All rights reserved.