Batimix PU Coating 460 G2C

Description

Premium two-component solvent-free polyurethane elastic coating material. It is based on pure hydrophobic polyurethane resin and special inorganic fillers, which result in excellent abrasion and chemical resistance.

Main Purpose

BATIMIX PU Coating 460 G2C is versatile and therefore suitable for various fields of use, such as:

• Roofs, balconies, and terraces
• Industrial floors & car parks
• Wet areas such as bathrooms, kitchens, and balconies
• Basement and sanitary / sewage walls
• Surfaces in contact with chemicals and fuels

Features

BATIMIX PU Coating 460 G2C adheres very well to substrates, creating a long-lasting reflective waterproof and highly flexible seamless, crack bridging membrane that cures by reaction with ground and air moisture.

It is resistant to water. It can withstand pedestrian and light vehicle traffic, acidic and alkali solutions, detergents, seawater, and oils. It is UV resistant.

Properties

• Mixture ratio: 5/1 : A/B (by weight)
• Density: 1.4 ± 0.05 gr/cm³ at 20 °C
• Potlife (500 gr at 23ºC): 30 min
• Stand on : 12 hours
• Hardening time: 3 days
• Consumption : 1.4 kg for 1mm thickness on 1 m²
• Resistance to temperature variations : from +5 to +30°C
• Package : 12 kg (A+B Set)

Health and Safety

Avoid BATIMIX PU Coating 460 G2C touching the skin and eyes. If it touches the skin, wash with water and soap. If in contact with the eyes, seek medical advice immediately. Keep away from children. Do not use empty packages for the storage of any nutriment.

Directions for Use

Surface preparation Careful surface preparation is essential for optimum finish and durability. Application surface needs to be dry, hard, and cleaned out from dirt, paint, and dust. In case of a crack or hole on the surface, it should be fixed prior to product application.

Application Component B should be added to component A, and mixed with an electrical mixer for a minimum of 3 minutes until it becomes homogenous. The mixture should be applied with a roller brush onto surfaces; application time between layers is 24-36 hours. The temperature of application surface should not be under +5 °C nor higher than +30 °C. Avoid standing on applied product before 12 hours. Avoid contact with water within 2 hours from application.

Technical Support

For proper products usage, Holderchem provides complete technical laboratory support and on-site assistance pertaining to application methods.

Storage

Pails should be stored in a dry/cool room, and used within 12 months from production date. The material should be protected from moisture and direct sunlight and packages stored upward at temperatures between +10 °C to 25 °C. Because of freezing in a short time span, opened packages should be used.

Packages

• A two-component 12 kg product packaged in metallic drums