Batimix Polyvac® 7030

Description

BATIMIX Polyvac 7030 is a binder emulsion for outdoor/indoor emulsion paints, primers, and textured coatings.

Main Purpose

BATIMIX Polyvac 7030 is primarily used for outdoor/ indoor emulsion paints, primers, and textured coatings. It is also used as a synthetic resin in the formulation of waterproofing, repair, and bonding agents.

Features

Specifications

| Specification | Result | | --------------------------------- | -------------------- | | Emulsion appearance | Smooth, white liquid | | Dry film appearance | Clear, flexible | | Emulsifier type | Nonionic/anionic | | Stabilizing agent | HEC | | Plasticizer | Internal | | Plasticizer content [% on total] | 0 | | pH at 25°C | 5 ± 1 | | Density at 25°C [g/cm³] | 1.07 ± 0.02 | | Dry solids content [%] | 52 ± 1 |

Typical Properties

| Property | Result | | -------------------------------------------------- | -------------- | | Viscosity [cP, Brookfield RVT sp7 at 5 rpm, 25°C] | 12,000 ± 2,000 | | Avg. particle size [µm] | ≤ 0.5 | | Free monomer [%] | ≤ 0.5 | | Grit content at 200 µm [%] | ≤ 0.1 | | Min. film-forming temperature [°C] | 11 | | Glass transition temperature [°C] | 26 ± 2 | | Water spot resistance [Index 1-10] | 9 | | Wet scrub resistance [cycles at 30 µm] | 5,000 |

Health and Safety

This product is water-based and non-toxic under normal conditions.

Storage

Containers should be well sealed and stored at a temperature above freezing; a temperature of 5-35°C is recommended. Higher temperatures or a bad seal could affect quality and cause formation of crusts and skin on the surface of the emulsion. Make sure containers are tightly closed at all times and not subjected to extreme temperatures, direct sunlight or heat for prolonged periods. If stored under correct conditions, this product is stable for at least one year.

Packages

• 1 t IBC
• 125 kg plastic drum