Batimix Polyvac® 3015

Holderchem

Copolymer of vinyl acetate and butyl acrylate synthetic resin

Description

BATIMIX Polyvac 3015 is a binder emulsion for indoor/outdoor paints.

Main Purpose

BATIMIX Polyvac 3015 is primarily used as a binder in the formulation of outdoor/ indoor paints. It is also used as a synthetic resin in the formulation of waterproofing, repair, and bonding agents.

Features

Specifications

| Specification | Result | | --------------------------------- | ------------------------ | | Emulsion appearance | Smooth, white liquid | | Dry film appearance | Clear, slightly flexible | | Emulsifier type | Nonionic/anionic | | Stabilizing agent | HEC | | Plasticizer | Internal | | Plasticizer content [% on total] | 0 | | pH at 25°C | 5 ± 1 | | Density at 25°C [g/cm³] | 1.07 ± 0.02 | | Dry solids content [%] | 52 ± 1 |

Typical Properties

| Property | Result | | -------------------------------------------------- | ------------- | | Viscosity [cP, Brookfield RVT sp7 at 5 rpm, 25°C] | 6,000 ± 2,000 | | Avg. particle size [µm] | ≤ 0.5 | | Free monomer [%] | ≤ 0.5 | | Grit content at 200 µm [%] | ≤ 0.1 | | Min. film-forming temperature [°C] | 8 | | Glass transition temperature [°C] | 22 ± 2 | | Water spot resistance [Index 1-10] | 9 | | Wet scrub resistance [cycles at 30 µm] | 2,600 |

Health and Safety

This product is water-based and non-toxic under normal conditions.

Storage

Containers should be well sealed and stored at a temperature above freezing; a temperature of 5-35°C is recommended. Higher temperatures or a bad seal could affect quality and cause formation of crusts and skin on the surface of the emulsion. Make sure containers are tightly closed at all times and not subjected to extreme temperatures, direct sunlight or heat for prolonged periods. If stored under correct conditions, this product is stable for at least one year.

Packages

  • 1 t IBC
  • 125 kg plastic drum
TS 5737Issue Date: 03-12-2020

The information and advice provided are based on current knowledge, Holderchem makes no warranty as to completeness or accuracy. {company} does not guarantee the merchantability or fitness of its products for particular purposes, and is not liable for any consequential or incidental damage or loss arising from the use of its products. HC®, HOLDERCHEM® and BATIMIX® are trademarks of {companyLegal}. Buyers should refer to recent product datasheets, trademark usage policies, and general conditions of sale on {website}. All rights reserved.