Batimix Epoxy Roll-On 300

Description

BATIMIX Epoxy Roll-On 300 is a solvent-based low viscosity epoxy coating mainly used in concrete systems as a protective coating for interior applications.

Main Purpose

BATIMIX Epoxy Roll-On 300 is a clear two-pack epoxy coating of low viscosity. It is used for its excellent wear and acid resistance characteristics to protect concrete floors, and metal supports. It is suitable for both horizontal and vertical applications. This product is also used as a dust-binder for concrete decks.

Features

BATIMIX Epoxy Roll-On 300 adheres strongly to concrete, with failure occurring within the concrete rather than the epoxy system on test. It also adheres very well to metal, wood, and most flooring compositions.

Properties

• Mixing ratio (Resin / Hardener): 3 / 0.4
• Viscosity at 20 °C (mixed): 5.5 poise
• Pot life at 20 °C: 30-40 min
• Hard dry at 20 °C: 15-20 hrs
• Hard dry at 10 °C: 18-28 hrs
• Full cure at 20 °C: 5-7 days
• Compressive strength (N/mm²): 55 - 65
• Flexural strength (N/mm²): 18 - 26
• Tensile strength (N/mm²): 14 - 20
• Bonding on concrete (N/mm²): > 3
• Bonding on steel (N/mm²): > 1 to 2

Health and Safety

BATIMIX Epoxy Roll-On 300 is not a hazardous material. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable gloves and goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.

Application & Dosage Rates

Pour the full content of the hardener container into the full content of the resin container and mix thoroughly with a slow speed electric stirrer for a minimum of 2 minutes.

BATIMIX Epoxy Roll-On 300 must be applied on sound and thoroughly cleaned substrates free of oil, dust, loose particles, and paints. The traces of mould joints must be leveled. All surfaces should be free from water prior to application. Admissible substrates include concrete, metal, wood, and most flooring compositions.

Apply by brush or roller, working the resin well into the surface. On porous surfaces apply further resin until the surface is completely wetted out. Push out the resin as thinly as possible, just leaving enough resin on the surface to give a wet appearance. Obtaining an antiskid surface is possible by broadcasting in the first layer of dry Quartz sand.

The temperature during application should be between 5 and 35 °C, and the maximum moisture content (relative humidity) should not exceed 75%.

BATIMIX Epoxy Roll-On 300 is generally applied at a rate of around 5 m²/L (for a thickness of 200 microns), depending on the porosity of the substrate. For the second layer, the rate can be around 8 m²/L. The product should be allowed to cure hard for minimum of 24 hours.

Compatibility

BATIMIX Epoxy Roll-On 300 is compatible with an extensive range of epoxy resin and polyurethane resin flooring systems.

Technical Support

For proper products usage, Holderchem provides complete technical laboratory support and on-site assistance pertaining to the application methods.

Storage

BATIMIX Epoxy Roll-On 300 has a minimum shelf life of 12 months if kept unopened and stored at temperatures ranging from 10 to 40 ºC.

Packages

• 16 kg unit consisting of two components, comprising a bucket of 14 kg of resin and a bucket of 2 kg of hardener
• 4 kg unit consisting of two components, comprising a bucket of 3 kg of resin and a bucket of 1 kg of hardener