Batimix Anti-Carbonation M-921

Description

BATIMIX Anti-Carbonation M-921 is designed from acrylic polymers blended with selected chemicals to protect atmospherically exposed reinforced concrete structures, cementitious-based substrates, and masonry from aggressive elements and weathering attacks.

Main Purpose

BATIMIX Anti-Carbonation M-921 is applied as a coating to protect exposed concrete and masonry substrates from aggressive elements such as carbon dioxide, chloride ions, and water. It is applied to concrete and mortar structures that are used in residential and commercial buildings. Applications also include bridge abutments, boundary walls, storage tanks, and other infrastructure elements.

Features

Substrates treated with BATIMIX Anti-Carbonation M-921 are characterised by the following:

• Minimised potential risk of efflorescence
• Minimised risk for carbonation due to carbon dioxide in the atmosphere
• Reduced penetration level of aggressive ions, chlorides, and water
• Longer service life and better surface quality

Properties

• Binder type: Acrylic copolymer
• Drying time (at 20 °C): To touch: 30-60 min -To re-coat: 1-2 hours -To fully cure: 7 days
• Dries by: Evaporation, coalescence
• PVC: 39.5% ±3
• Specific gravity: 1.3 ± 0.05
• pH: 8.5 ± 0.5
• Surface temperature at application: Min: 10 °C - Max: 32 °C
• Thin with: Clean water

Health and Safety

BATIMIX Anti-Carbonation M-921 is not a hazardous material. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable gloves and goggles should be worn. For additional information, kindly refer to the product’s Material Safety Data Sheet.

Dosage Rates

The substrate should be dry prior to the application. It should be thoroughly cleaned from all dust, grout, dirt particles, oil grease, or other impurities which can adversely affect uniform adhesion.

Apply BATIMIX Anti-Carbonation M-921 using a brush, roller, or spraying machine until the substrate is saturated. The material consumption is estimated at about 4 to 10 m2 per kg, depending on the porosity of the substrate. Two or three coats may be required in case the structure is exposed to highly aggressive ions.

Compatibility

BATIMIX Anti-Carbonation M-921 is compatible with all types of cementitious-based substrates made using Portland cement or replacement materials such as silica fume, fly ash, or blast furnace slag. Its final performance should be assessed using trial tests.

Dispensing

BATIMIX Anti-Carbonation M-921 can be applied using a brush, roller, or any suitable spraying machine. Shake well the product prior to application.

Technical Support

Holderchem provides, upon request, technical advisory services pertaining to mix design, admixture selection, and materials evaluation.

Storage

BATIMIX Anti-Carbonation M-921 has a minimum shelf life of 12 months if kept unopened. It must be stored at temperatures ranging from 5 to 40 °C. It should not be subjected to direct sunlight.

Packages

• 20 kg plastic pail
• 4 kg plastic pail